MEMOPOWER II
1-3kVA
MEMOPOWER II 1-3kVA is small power UPS of KSTAR, both input and output are single phase, the output factor is 0.8.When UPS is on battery mode, it can shut down unnecessary load and extend the backup time of the critical load
General Features
● High power density
● Output power factor up to 0.9
● Three stage charging mode extends battery life,optimizes recharging time
● Selectable high efficiency mode of operation
● Cold start
● Self-testing when UPS startup
● Standard communication options: RS232 communication port, USB communication port, and relay output contacts or SNMP card
● Extended runtime with up to four extended battery modules (EBPs) per UPS
● Emergency shutdown control through the remote emergency power-off (EPO) port
● Versatile LCD human-computer interface
Technical Specification
MODEL | MEMO II 1K(S/H) | MEMO II 2K(S/H) | MEMO II 3K(S/H) | ||
Capacity (VA/Watts) | 1000/800W | 2000/1600W | 3000/2400W | ||
Phase | Single phase with ground | ||||
INPUT | |||||
Nominal Voltage | 200/208/220/230/240Vac or 100/110/115/120/127Vac | ||||
Input Voltage Range | 55~150Vac or 110~300Vac @ 60% load, 80~145Vac or 160~300Vac @ 100% load | ||||
Frequency Range | 45~55Hz / 55~65Hz(auto-detect) | ||||
Power Factor | ≥0.99 @Nominal voltage(100% load) | ||||
OUTPUT | |||||
Output Voltage | 200/208/220/230/240Vac or 100/110/115/120/127Vac | ||||
Power Factor | 0.8 | ||||
Voltage Regulation | ±1% | ||||
Frequency | Synchronized Range | 45~55Hz/56~64Hz | |||
Battery Mode & None Synchronized Range |
50Hz/60Hz±0.1Hz | ||||
Crest Factor | 3:1 | ||||
Harmonic Distortion (THDv) | ≤3% THD (Linear load) | ||||
≤6% THD (Non-linear load) | |||||
Waveform | Pure Sinewave | ||||
Transfer Time | AC to DC | Zero | |||
Inverter to bypass | 4ms(Typical) | ||||
EFFICIENCY | |||||
AC Mode | 88% | 89% | 90% | ||
Battery Mode | 83% | 85% | 86% | ||
BATTERY | |||||
Standard model | Battery Type | 12V/9AH | |||
Numbers | 2/3 | 4/6/8 | 6/8 | ||
Typical recharging time | 4 hours recover to 90% capacity | ||||
Charging current(max.) | 1.0A | ||||
Charging voltage | 27.4/41.1Vdc±1% | 54.7Vdc/82.1Vdc/109.4Vdc ±1% | 82.1Vdc/109.4Vdc ±1% | ||
Long run model | Battery numbers | Depending on the capacity of external batteries | |||
Charging current(max.) | 6A/12A (double board) | ||||
Charging voltage | 27.4/41.1Vdc ±1% | 54.7Vdc/82.1Vdc/109.4Vdc ±1% | 82.1Vdc/109.4Vdc ±1% | ||
INDICATORS | |||||
LCD Display | Load level,Battery level,AC mode,Battery mode,Bypass mode, and Fault indicators |
||||
ALARM | |||||
Battery Mode | Beeping every 4 seconds | ||||
Battery Low | Beeping every second | ||||
Overload | Beeping twice every second | ||||
Fault | Continously beeping | ||||
PHYSICAL | |||||
Standard model | Dimension W×D×H (mm) | 400×144×215 | 470×191×336 | ||
Net Weight (kg) | 10/13 | 21/25/30 | 25/30 | ||
Long run model | Dimension W×D×H (mm) | 400×144×215 | 470×191×336 | ||
Net Weight (kg) | 5.6 | 11 | 11.5 | ||
ENVIRONMENT | |||||
Humidity | 20~90% RH @ 0~40℃ (Non-condensing) | ||||
Noise Level | <50db @ 1 Meter | ||||
MANAGEMENT | |||||
Smart RS-232/USB | Supports Windows® 2000/2003/XP/Vista/2008 Windows® 7/8 Linux,FreeBSD and MAC |
||||
Intelligent Slot | Power management from SNMP manager and web browser |
Success Cases