Home >  OEM/ODM > 데이터 센터 산업 > ups> 온라인 무변압기형 UPS> HIP3300 (100-500kVA)
HIP3300 series UPS is developed as a high frequency large capacity tower UPS which adopting similar modular design thought, excellent performance parameters, higher efficiency, more reliable, maily used in medium and large data center, bank/security settlement center, dispatching center, control center, management center fields and so on. Parallel.
General Features

● DSP-controlled technology

● Parallel redundancy up to 4 units

● Wide input voltage and frequency range

● Easy-to-operate LCD display

● High power density up to 500kVA for space saving

● High input power factor and low input distortion

● Output power factor at 0.8(0.9 optional)

● ECO mode for energy saving

● Common or separate battery

● Programmable battery voltage from ±192Vdc to±240Vdc

● Intelligent charge modes with smart charge current adjustment

● Megatec/ModBus protocol supported

● Powerful charger built in

● Versatile communication interfaces provided for different applicati

● Superior overload capability

● Programmable control and monitoring software

Technical Specification  
MODEL HIP3310H HIP3312H HIP3316H HIP3320H  HIP3325H  HIP3330  HIP3340  HIP3350
Capacity (VA/Watts) 100k / 80k 120k / 96k 160k / 128k 200k / 160k 250k / 200k 300k / 240k 400k / 320k 500k / 400k
Nominal voltage 380/400/415Vac(3Ph+N+PE)
Operating voltage range 208~478Vac for half load; 305~478Vac for full load 
Operating frequency range 40~70Hz
Power factor ≥0.99
Harmonic distortion (THDi) 3%(100% non-linear load)
Bypass voltage range 380Vac Max.voltage: +25%(optional +10%,+15%,+20% )
400Vac Max.voltage: +20% (optional +10%,+15%)
415Vac Max.voltage: +15% (optional +10%)
Min.voltage: -45% (optional -20%,-30%)
Bypass frequency range  Frequency synchronize tracing range:±10%
Generator access Support
Rated voltage 380/400/415Vac(3Ph+N+PE)
Power factor 0.8/0.9(Customized)
Voltage regulation ±1%
Frequency Line mode ±1%/±2%/±4%/±5%/±10% of the rated frequency(optional)
Bat. mode (50/60±0.2%)Hz
Crest factor 3:1
Harmonic distortion (THDv) ≤2% with linear load
≤5% with non-linear load  
Efficiency 95.00%
Battery voltage Standard unit: ±216Vdc;   Long run unit optional voltage: ±192 / ±204 / ±216 / ±228 / ±240Vdc
Charging current(A)
(Charging current can be set according to battery capacity installed)
30A (Max.) 40A (Max.) 50A (Max.) 70A (Max.) 80A (Max.) 100A (Max.) 130A (Max.)
Transfer time Utility to battery:0ms; Utility to bypass:0ms
Overload Line mode Load≤110%: last 60min,≤125%: last 10min,≤150%: last 1min,≥150% turn to bypass mode immediately
Bat. mode Load≤110%: last 60min,≤125%: last 10min,≤150%: last 1min,≥150% shut down UPS immediately
Short circuit Hold whole system
Overheat Line mode: Switch to bypass; Backup mode: Shut down UPS immediately
Low battery voltage Alarm and switch off
Self-diagnostic Upon power on and software control 
EPO (optional) Shut down UPS immediately
Battery  Advanced battery management 
Noise suppression Complies with EN62040-2
Audible & Visual Line failure, Battery low, Overload, System fault
Status LED & LCD display Line mode, Bypass mode, Battery low, Battery bad, Overload & UPS fault
Reading on the LCD display Input voltage, Input frequency, Output voltage, Output frequency, Load percentage, Battery voltage & Inner temperature
Communication interface  USB,RS232,RS485,Parallel,Intelligent slot,Relay card(optional),SNMP card(optional)
Operating temperature 0~40℃
Storage temperature -25~55℃(No battery)
Humidity range 0~95% (Non-condensing)
Altitude <1500m. When >1500m, derating power for use
Noise level <65dB <70dB <73dB
Dimension D×W×H (mm) 850×600×1600  850×600×2000  850×1200×2000
Net weight (kg) 320 322 360 415 555 590 880 980
Safety  IEC/EN62040-1,IEC/EN60950-1
EMC IEC/EN62040-2,IEC61000-4-2,IEC61000-4-3,IEC61000-4-4, IEC61000-4-5,IEC61000-4-6,IEC61000-4-8
Success Cases